3x5, 3x8, 3x10 ft
Thickness: 0.8 mm (business card)
MATT Flex - Concrete Without Limits
Freedom from rigid panels
MATT Flex is our ultra-thin, flexible concrete finish that brings the beauty of handcrafted concrete to the most dynamic spaces — with none of the weight or rigidity of traditional panels.
​
​
Where to Use MATT Flex
MATT Flex is the perfect choice for:
-
Curved walls
-
Columns and posts
-
Ceilings and custom surfaces
-
Corners and returns
-
Furniture/Cabinetry
-
Hood Fans​​
Easy tooling and cutting on-site
1. Measure & Cut
Use a utility knife and straightedge to cut MATT Flex panels to your desired dimensions.
2. Apply Adhesive to Wall
Roll adhesive directly onto the surface. Standard wallpaper or tile adhesives can be used.
3. Apply Adhesive to MATT Flex
For extra bond strength, apply adhesive to the back of the MATT Flex.
4. Mist the surface
Spray a light mist of water on the surface of MATT Flex to improve flexibility and handling.
5. Stick & Smooth
Position MATT FLex and smooth it onto the surface using a trowel or flat tool to remove air pockets.
Note:
Use a damp cloth with mild soapy water to wipe off any excess adhesive and keep the surface clean during installation
Size & Specs
MATT Flex comes in a fixed width of 3 feet, with standard lengths of 5, 8, and 10 feet. Custom lengths are also available upon request.
​
With a thickness of just 0.8 mm — about the same as a business card — each panel weighs only 0.3 lb per square foot, making it exceptionally lightweight and easy to handle on site.
Finishes & Colours
MATT™ Felx is available in the same five finishes as our other products; from smooth and polished, to an industrial looking finish with cone tie imprints, to a textured finish resembling rustic wooden boards. Each finish comes in three colours: Grey, Black or White. The soft hues of our natural Grey boards give you the look of traditional concrete and a neutral colour scheme, while Black or White adds drama wherever it’s used.
